使用BMM MachOne mechanical tester，MachOne – Automated Indentation Mapping (MA056-SOP01-D v2) Sim S and Quenneville E BMM Inc. Laval (QC), Canada, Effective Date: April 7th, 2015 Purpose: This procedure describes a standard method to realize an automated indentation mapping over the surface of a sample using the MachOne mechanical tester (model v500css or v500csst, with software add-on for Automated Indentation... Read More MA056-SOP01-D v2 MachOne - Automated Indentation Mapping.pdf Mach - Automated Thickness Mapping of an Articular Surface (MA056-SOP02-D v2) Sim S and Quenneville E BMM Inc. Laval (QC), Canada, Effective Date: April 7th, 2015 Purpose: This procedure describes a standard method to realize an automated thickness mapping over the non-planar surface of articular cartilage using the MachOne mechanical tester (model v500css or v500csst, with software add-on for... Read More MA056-SOP02-D v2 MachOne - Automated Thickness Mapping of an Articular Surface.pdf MachOne - Unconfined Compression of an Articular Cartilage Osteochondral (MA056-SOP03-D v2) Sim S and Quenneville E BMM Inc. Laval (QC), Canada, Effective Date: April 7th, 2015 Purpose: This procedure describes a standard method to realize unconfined compression on an osteochondral using the MachOne mechanical tester. Scope: This procedure can be used for the ex... Read More MA056-SOP03-D v2 MachOne - Unconfined Compression of an Articular Cartilage Osteochondral .pdf MachOne - Dynamic Mechanical Testing (MA056-SOP04-D v1) Hadjab I and Quenneville E BMM Inc. Laval (QC), Canada, Effective Date: December 3rd, 2014 Purpose This document describes a standard method to assess the frequency behavior of the dynamic mechanical properties of material through the complex Young’s (E*) or shear (G*) modulus using the MachOne mechanical tester.... Read More MA056-SOP04-D v1 MachOne - Dynamic Mechanical Testing.pdf MachOne - Unconfined Compression of a Disk (MA056-SOP05-D v1) Sim S and Quenneville E BMM Inc. Laval (QC), Canada, Effective Date: April 14th, 2015 Purpose This procedure describes a standard method to realize unconfined compression on a disk-shaped sample using the MachOneTM mechanical tester. Scope This procedure can be... Read More MA056-SOP05-D v1 MachOne - Unconfined Compression of a Disk.pdf MachOne - Confined Compression of a Cartilage Disk (MA056-SOP06-D v3) Sim S and Quenneville E BMM Inc. Laval (QC), Canada, Effective Date: July 27th, 2017 Purpose This procedure describes a standard method to realize confined compression of a cartilage disk using the MachOneTM mechanical tester. Scope This procedure can be... Read More MA056-SOP06-D v3 MachOne - Confined Compression of a Cartilage Disk.pdf MachOne - Shear Testing on a Cartilage Disk or an Osteochondral (MA056-SOP07-D v2) Tessier J and Quenneville E BMM Inc. Laval (QC), Canada, Effective Date: August 25th, 2015 Purpose This procedure describes a standard method to realize a planar or a torsion shear test on an articular cartilage disk or an osteochondral using the MachOneTM mechanical tester. Read More MA056-SOP07-D v2 MachOne - Shear Testing on a Cartilage Disk or an Osteochondral .pdf MachOne - Friction Testing on a Cartilage Disk or an Osteochondral (MA056-SOP08-D v2) Chartrand A and Quenneville E BMM Inc. Laval (QC), Canada, Effective Date: August 24th, 2015 Purpose This procedure describes a standard method to realize a friction test on a cartilage disk or an osteochondral using the MachOne TM mechanical tester. Read More MA056-SOP08-D v2 MachOne - Friction Testing on a Cartilage Disk or an Osteochondral .pdf MachOne Extraction and Preparation of Cartilage Disks and Osteochondral s from an Articular Surface (MA056-SOP09-D v1) Sim S and Quenneville E BMM Inc. Laval (QC), Canada, Effective Date: August 25th, 2015 Purpose This procedure describes a standard method to extract and prepare cartilage disks and osteochondral s from an articular surface. Scope This procedure can be used for the... Read More MA056-SOP09-D v1 MachOne - Extraction and Preparation of Cartilage Disks and Osteochondral s from an Articular Surface.pdf MachOne - Extraction of Articular Surfaces from a Closed Stifle Joint in Large Animal Species (MA056-SOP10-D v1) Sim S and Quenneville E BMM Inc. Laval (QC), Canada, Effective Date: February 1st, 2016 Purpose This procedure describes a standard method to extract articular surface from a closed stifle joint in large animals. Scope This procedure can be used for the stifle joint of large... Read More MA056-SOP10-D v1 MachOne - Extraction of Articular Surfaces from a Closed Stifle Joint in Large Animal Species.pdf MachOne - 3-point or 4-point Bending Test (MA056-SOP11-D v2) Sim S and Quenneville E BMM Inc. Laval (QC), Canada, Effective Date: March 9th, 2016 Purpose This procedure describes a standard method to realize a flexural (3-point and 4-point) bend test on a material sample using the MachOne mechanical tester. Scope This procedure can... Read More MA056-SOP11-D v2 MachOne - 3-point or 4-point Bending Test.pdf MachOne Analysis - Extraction of Elastic Model Parameters Following an Automated Indentation Mapping (SW186-SOP01-D v1) Sim S and Quenneville E BMM Inc. Laval (QC), Canada, Effective Date: April 17th, 2015 Purpose This procedure describes a method to extract elastic model parameters (Instantaneous modulus, which is referred as the Young’s modulus in MachOne analysis, and shear modulus) from MachOne files generated during an automated... Read More SW186-SOP01-D v1 MachOne Analysis - Extraction of Elastic Model Parameters Following an Automated Indentation Mapping.pdf MachOne Analysis - Extraction of Thickness Values Following Automated Thickness Mapping of an Articular Surface (SW186-SOP02-D v1) Sim S, Lavoie JF and Quenneville E BMM Inc. Laval (QC), Canada, Effective Date: April 22th, 2015 Purpose This procedure describes a method to extract the thickness of cartilage from MachOne files generated during an automated thickness mapping of an articular surface (as per MA056-SOP02-D). It also describes the creation of a... Read More SW186-SOP02-D v1 MachOne Analysis - Extraction of Thickness Values Following Automated Thickness Mapping of an Articular Surface.pdf MachOne Analysis - Extraction of Mechanical Parameters Following Unconfined Compression (SW186-SOP03-D v1) Sim S BMM Inc. Laval (QC), Canada, Effective Date: April 15th, 2015 Purpose This procedure describes a method to extract mechanical parameters from MachOne result files generated during an unconfined compression of a sample (e.g. an osteochondral (as per MA056-SOP03-D) or a disk (as per... Read More SW186-SOP03-D v1 MachOne Analysis - Extraction of Mechanical Parameters Following Unconfined Compression.pdf MachOne Analysis - Extraction of the Complex Modulus Components Following Dynamic Mechanical Testing (SW186-SOP04-D v1) Hadjab I and Quenneville E BMM Inc. Laval (QC), Canada, Effective Date: December 3rd, 2014 Purpose This procedure describes a method for the extraction of the complex modulus components (Young’s (E’ and E”) and shear (G’ and G”) modulus) following dynamic mechanical testing performed as per... Read More SW186-SOP04-D%20v1%20MachOne%20Analysis%20-%20Extraction%20of%20the%20Complex%20Modulus%20Components%20Following%20Dynamic%20Mechanical%20Testing.pdf MachOne Analysis - Extraction of Mechanical Parameters Following Confined Compression (SW186-SOP05-D v2) Lavallée AP and Quenneville E BMM Inc. Laval (QC), Canada, Effective Date: August 24th, 2015 Purpose This procedure describes a standard method to extract mechanical parameters from a MachOne result file generated during confined compression of a cartilage disk perform as per MA056-SOP06-D. Scope This... Read More SW186-SOP05-D v2 MachOne Analysis - Extraction of Mechanical Parameters Following Confined Compression.pdf MachOne Analysis - Extraction of Mechanical Parameters Following Shear Testing on a Cartilage Disk or an Osteochondral (SW186-SOP06-D v1) Lavallée AP BMM Inc. Laval (QC), Canada, Effective Date: August 19th, 2015 Purpose This procedure describes a method to extract mechanical parameters from MachOne result files generated following shear testing on a cartilage disk or an osteochondral as per MA056-SOP07-D. Read More SW186-SOP06-D v1 MachOne Analysis - Extraction of Mechanical Parameters Following Shear Testing on a Cartilage Disk or an Osteochondral .pdf MachOne Analysis - Extraction of Mechanical Parameters Following Friction Testing on a Cartilage Disk or an Osteochondral (SW186-SOP07-D v2) Chartrand A and Quenneville E BMM Inc. Laval (QC), Canada, Effective Date: August 24h, 2015 Purpose This procedure describes a MatLab-based method to extract mechanical parameters from the MachOne result files generated following friction testing on a cartilage disk or an osteochondral as per... Read More SW186-SOP07-D v2 MachOne Analysis - Extraction of Mechanical Parameters Following Friction Testing on a Cartilage Disk or an Osteochondral .pdf MachOne Analysis - Extraction of Mechanical Parameters Following Bending Test (SW186-SOP08-D v2) Sim S BMM Inc. Laval (QC), Canada, Effective Date: March 9th, 2016 Purpose This procedure describes a method for the extraction of mechanical parameters such as the modulus of elasticity in bending (Ef ) and the maximum flexural strength (?f ) following a flexural (3-point and 4-point bend) test... Read More SW186-SOP08-D v2 MachOne Analysis - Extraction of Mechanical Parameters Following Bending Test.pdf MachOne - Hardness Testing (MA056-SOP12-D v1) Gilbert N and Quenneville E BMM Inc. Laval (QC), Canada, Effective Date: December 9th, 2016 Purpose: This procedure describes a standard method to realize an indentation hardness test on a material sample using the MachOne mechanical tester. Scope: This procedure can be applied on any type of... Read More MA056-SOP12-D v1 MachOne - Hardness Testing.pdf MachOne - Lap Shear Testing (MA056-SOP13-D v2) Gilbert N and Quenneville E BMM Inc. Laval (QC), Canada, Effective Date: December 19th, 2016 Purpose: This procedure describes a standard method to realize a lap shear test on an adhesive between two substrates using the MachOne mechanical tester. Scope: This procedure can be used for lap shear adhesion testing.... Read More MA056-SOP13-D v2 MachOne - Lap Shear Testing.pdf MachOne Analysis - Extraction of Mechanical Parameters Following Lap Shear Test (SW186-SOP09-D v2) Gilbert N and Quenneville E BMM Inc. Laval (QC), Canada, Effective Date: December 19th, 2016. Purpose This procedure describes a method to extract mechanical parameters from MachOne result files generated following lap shear testing on an adhesive between two substrates as per MA056-SOP13-D. Read More SW186-SOP09-D v2 MachOne Analysis - Extraction of Mechanical Parameters Following Lap Shear Test.pdf MachOne - Flexion Testing of Needle-Shaped Samples (MA056-SOP14-D v2) Gilbert N and Quenneville E BMM Inc. Laval (QC), Canada, Effective Date: 26Jan2018 Purpose This procedure describes a standard method of performing a flexural bend test on a needle-shaped sample with a protruding head using the MachOneTM mechanical tester. Read More MA056-SOP14-D v2 MachOne - Flexion Testing of Needle-Shaped Samples.pdf Mach 1 Analysis - Extraction of Mechanical Parameters Following Flexion Testing of Needle-Shaped Samples (SW186-SOP10-D v2) Gilbert N and Quenneville E BMM Inc. Laval (QC), Canada, Effective Date: 16Jan2018 Purpose This procedure describes a standard method to extract the following mechanical parameters from a flexural bend test on a needle-shaped sample with a protruding head using the MachOneTM mechanical tester:... Read More SW186-SOP10-D v2 MachOne Analysis - Extraction of Mechanical Parameters Following Flexion Testing of Needle-Shaped Samples.pdf Indentation and Thickness Mapping of Articular Surfaces through Manual Positioning (Protocol Template AAAX1 v1) BMM Inc. Laval (QC), Canada, Effective Date: December 6th, 2016. Purpose
型号:MachOne mechanical tester
联系人:李先生
联系电话:18618101725
品牌:BMM
MachOne – Automated Indentation Mapping (MA056-SOP01-D v2)
Sim S and Quenneville E
BMM Inc. Laval (QC), Canada, Effective Date: April 7th, 2015
Purpose: This procedure describes a standard method to realize an automated indentation mapping over the surface of a sample using the MachOne mechanical tester (model v500css or v500csst, with software add-on for Automated Indentation...
Read More
MA056-SOP01-D v2 MachOne - Automated Indentation Mapping.pdf
Mach - Automated Thickness Mapping of an Articular Surface (MA056-SOP02-D v2)
Sim S and Quenneville E
BMM Inc. Laval (QC), Canada, Effective Date: April 7th, 2015
Purpose: This procedure describes a standard method to realize an automated thickness mapping over the non-planar surface of articular cartilage using the MachOne mechanical tester (model v500css or v500csst, with software add-on for...
Read More
MA056-SOP02-D v2 MachOne - Automated Thickness Mapping of an Articular Surface.pdf
MachOne - Unconfined Compression of an Articular Cartilage Osteochondral (MA056-SOP03-D v2)
Sim S and Quenneville E
BMM Inc. Laval (QC), Canada, Effective Date: April 7th, 2015
Purpose: This procedure describes a standard method to realize unconfined compression on an osteochondral using the MachOne mechanical tester.
Scope: This procedure can be used for the ex...
Read More
MA056-SOP03-D v2 MachOne - Unconfined Compression of an Articular Cartilage Osteochondral .pdf
MachOne - Dynamic Mechanical Testing (MA056-SOP04-D v1)
Hadjab I and Quenneville E
BMM Inc. Laval (QC), Canada, Effective Date: December 3rd, 2014
Purpose
This document describes a standard method to assess the frequency behavior of the dynamic mechanical properties of material through the complex Young’s (E*) or shear (G*) modulus using the MachOne mechanical tester....
Read More
MA056-SOP04-D v1 MachOne - Dynamic Mechanical Testing.pdf
MachOne - Unconfined Compression of a Disk (MA056-SOP05-D v1)
Sim S and Quenneville E
BMM Inc. Laval (QC), Canada, Effective Date: April 14th, 2015
Purpose
This procedure describes a standard method to realize unconfined compression on a disk-shaped sample using the MachOneTM mechanical tester.
Scope
This procedure can be...
Read More
MA056-SOP05-D v1 MachOne - Unconfined Compression of a Disk.pdf
MachOne - Confined Compression of a Cartilage Disk (MA056-SOP06-D v3)
Sim S and Quenneville E
BMM Inc. Laval (QC), Canada, Effective Date: July 27th, 2017
Purpose
This procedure describes a standard method to realize confined compression of a cartilage disk using the MachOneTM mechanical tester.
Scope
This procedure can be...
Read More
MA056-SOP06-D v3 MachOne - Confined Compression of a Cartilage Disk.pdf
MachOne - Shear Testing on a Cartilage Disk or an Osteochondral (MA056-SOP07-D v2)
Tessier J and Quenneville E
BMM Inc. Laval (QC), Canada, Effective Date: August 25th, 2015
Purpose
This procedure describes a standard method to realize a planar or a torsion shear test on an articular cartilage disk or an osteochondral using the MachOneTM mechanical tester.
Read More
MA056-SOP07-D v2 MachOne - Shear Testing on a Cartilage Disk or an Osteochondral .pdf
MachOne - Friction Testing on a Cartilage Disk or an Osteochondral (MA056-SOP08-D v2)
Chartrand A and Quenneville E
BMM Inc. Laval (QC), Canada, Effective Date: August 24th, 2015
Purpose
This procedure describes a standard method to realize a friction test on a cartilage disk or an osteochondral using the MachOne TM mechanical tester.
Read More
MA056-SOP08-D v2 MachOne - Friction Testing on a Cartilage Disk or an Osteochondral .pdf
MachOne Extraction and Preparation of Cartilage Disks and Osteochondral s from an Articular Surface (MA056-SOP09-D v1)
Sim S and Quenneville E
BMM Inc. Laval (QC), Canada, Effective Date: August 25th, 2015
Purpose
This procedure describes a standard method to extract and prepare cartilage disks and osteochondral s from an articular surface.
Scope
This procedure can be used for the...
Read More
MA056-SOP09-D v1 MachOne - Extraction and Preparation of Cartilage Disks and Osteochondral s from an Articular Surface.pdf
MachOne - Extraction of Articular Surfaces from a Closed Stifle Joint in Large Animal Species (MA056-SOP10-D v1)
Sim S and Quenneville E
BMM Inc. Laval (QC), Canada, Effective Date: February 1st, 2016
Purpose
This procedure describes a standard method to extract articular surface from a closed stifle joint in large animals.
Scope
This procedure can be used for the stifle joint of large...
Read More
MA056-SOP10-D v1 MachOne - Extraction of Articular Surfaces from a Closed Stifle Joint in Large Animal Species.pdf
MachOne - 3-point or 4-point Bending Test (MA056-SOP11-D v2)
Sim S and Quenneville E
BMM Inc. Laval (QC), Canada, Effective Date: March 9th, 2016
Purpose
This procedure describes a standard method to realize a flexural (3-point and 4-point) bend test on a material sample using the MachOne mechanical tester.
Scope
This procedure can...
Read More
MA056-SOP11-D v2 MachOne - 3-point or 4-point Bending Test.pdf
MachOne Analysis - Extraction of Elastic Model Parameters Following an Automated Indentation Mapping (SW186-SOP01-D v1)
Sim S and Quenneville E
BMM Inc. Laval (QC), Canada, Effective Date: April 17th, 2015
Purpose
This procedure describes a method to extract elastic model parameters (Instantaneous modulus, which is referred as the Young’s modulus in MachOne analysis, and shear modulus) from MachOne files generated during an automated...
Read More
SW186-SOP01-D v1 MachOne Analysis - Extraction of Elastic Model Parameters Following an Automated Indentation Mapping.pdf
MachOne Analysis - Extraction of Thickness Values Following Automated Thickness Mapping of an Articular Surface (SW186-SOP02-D v1)
Sim S, Lavoie JF and Quenneville E
BMM Inc. Laval (QC), Canada, Effective Date: April 22th, 2015
Purpose
This procedure describes a method to extract the thickness of cartilage from MachOne files generated during an automated thickness mapping of an articular surface (as per MA056-SOP02-D). It also describes the creation of a...
Read More
SW186-SOP02-D v1 MachOne Analysis - Extraction of Thickness Values Following Automated Thickness Mapping of an Articular Surface.pdf
MachOne Analysis - Extraction of Mechanical Parameters Following Unconfined Compression (SW186-SOP03-D v1)
Sim S
BMM Inc. Laval (QC), Canada, Effective Date: April 15th, 2015
Purpose
This procedure describes a method to extract mechanical parameters from MachOne result files generated during an unconfined compression of a sample (e.g. an osteochondral (as per MA056-SOP03-D) or a disk (as per...
Read More
SW186-SOP03-D v1 MachOne Analysis - Extraction of Mechanical Parameters Following Unconfined Compression.pdf
MachOne Analysis - Extraction of the Complex Modulus Components Following Dynamic Mechanical Testing (SW186-SOP04-D v1)
Hadjab I and Quenneville E
BMM Inc. Laval (QC), Canada, Effective Date: December 3rd, 2014
Purpose
This procedure describes a method for the extraction of the complex modulus components (Young’s (E’ and E”) and shear (G’ and G”) modulus) following dynamic mechanical testing performed as per...
Read More
SW186-SOP04-D%20v1%20MachOne%20Analysis%20-%20Extraction%20of%20the%20Complex%20Modulus%20Components%20Following%20Dynamic%20Mechanical%20Testing.pdf
MachOne Analysis - Extraction of Mechanical Parameters Following Confined Compression (SW186-SOP05-D v2)
Lavallée AP and Quenneville E
BMM Inc. Laval (QC), Canada, Effective Date: August 24th, 2015
Purpose
This procedure describes a standard method to extract mechanical parameters from a MachOne result file generated during confined compression of a cartilage disk perform as per MA056-SOP06-D.
Scope
This...
Read More
SW186-SOP05-D v2 MachOne Analysis - Extraction of Mechanical Parameters Following Confined Compression.pdf
MachOne Analysis - Extraction of Mechanical Parameters Following Shear Testing on a Cartilage Disk or an Osteochondral (SW186-SOP06-D v1)
Lavallée AP
BMM Inc. Laval (QC), Canada, Effective Date: August 19th, 2015
Purpose
This procedure describes a method to extract mechanical parameters from MachOne result files generated following shear testing on a cartilage disk or an osteochondral as per MA056-SOP07-D.
Read More
SW186-SOP06-D v1 MachOne Analysis - Extraction of Mechanical Parameters Following Shear Testing on a Cartilage Disk or an Osteochondral .pdf
MachOne Analysis - Extraction of Mechanical Parameters Following Friction Testing on a Cartilage Disk or an Osteochondral (SW186-SOP07-D v2)
Chartrand A and Quenneville E
BMM Inc. Laval (QC), Canada, Effective Date: August 24h, 2015
Purpose
This procedure describes a MatLab-based method to extract mechanical parameters from the MachOne result files generated following friction testing on a cartilage disk or an osteochondral as per...
Read More
SW186-SOP07-D v2 MachOne Analysis - Extraction of Mechanical Parameters Following Friction Testing on a Cartilage Disk or an Osteochondral .pdf
MachOne Analysis - Extraction of Mechanical Parameters Following Bending Test (SW186-SOP08-D v2)
Sim S
BMM Inc. Laval (QC), Canada, Effective Date: March 9th, 2016
Purpose
This procedure describes a method for the extraction of mechanical parameters such as the modulus of elasticity in bending (Ef ) and the maximum flexural strength (?f ) following a flexural (3-point and 4-point bend) test...
Read More
SW186-SOP08-D v2 MachOne Analysis - Extraction of Mechanical Parameters Following Bending Test.pdf
MachOne - Hardness Testing (MA056-SOP12-D v1)
Gilbert N and Quenneville E
BMM Inc. Laval (QC), Canada, Effective Date: December 9th, 2016
Purpose: This procedure describes a standard method to realize an indentation hardness test on a material sample using the MachOne mechanical tester.
Scope: This procedure can be applied on any type of...
Read More
MA056-SOP12-D v1 MachOne - Hardness Testing.pdf
MachOne - Lap Shear Testing (MA056-SOP13-D v2)
Gilbert N and Quenneville E
BMM Inc. Laval (QC), Canada, Effective Date: December 19th, 2016
Purpose: This procedure describes a standard method to realize a lap shear test on an adhesive between two substrates using the MachOne mechanical tester.
Scope: This procedure can be used for lap shear adhesion testing....
Read More
MA056-SOP13-D v2 MachOne - Lap Shear Testing.pdf
MachOne Analysis - Extraction of Mechanical Parameters Following Lap Shear Test (SW186-SOP09-D v2)
Gilbert N and Quenneville E
BMM Inc. Laval (QC), Canada, Effective Date: December 19th, 2016.
Purpose
This procedure describes a method to extract mechanical parameters from MachOne result files generated following lap shear testing on an adhesive between two substrates as per MA056-SOP13-D.
Read More
SW186-SOP09-D v2 MachOne Analysis - Extraction of Mechanical Parameters Following Lap Shear Test.pdf
MachOne - Flexion Testing of Needle-Shaped Samples (MA056-SOP14-D v2)
Gilbert N and Quenneville E
BMM Inc. Laval (QC), Canada, Effective Date: 26Jan2018
Purpose
This procedure describes a standard method of performing a flexural bend test on a needle-shaped sample with a protruding head using the MachOneTM mechanical tester.
Read More
MA056-SOP14-D v2 MachOne - Flexion Testing of Needle-Shaped Samples.pdf
Mach 1 Analysis - Extraction of Mechanical Parameters Following Flexion Testing of Needle-Shaped Samples (SW186-SOP10-D v2)
Gilbert N and Quenneville E
BMM Inc. Laval (QC), Canada, Effective Date: 16Jan2018
Purpose
This procedure describes a standard method to extract the following mechanical parameters from a flexural bend test on a needle-shaped sample with a protruding head using the MachOneTM mechanical tester:...
Read More
SW186-SOP10-D v2 MachOne Analysis - Extraction of Mechanical Parameters Following Flexion Testing of Needle-Shaped Samples.pdf
Indentation and Thickness Mapping of Articular Surfaces through Manual Positioning (Protocol Template AAAX1 v1)
BMM Inc. Laval (QC), Canada, Effective Date: December 6th, 2016.
Purpose
